Shaft Hog Laser Alignment Tool
for Motors and Pumps

Order This Item

Shaft Hog Laser Shaft Alignment Tool
(Mfr. part #LS-5)

C U R R E N T   P R I C E

 -- $4,875.00


A V A I L A B I L I T Y

-- Vendor Warehouse Item
-- Currently in Stock





Order This Item

-- Technical Data

Housing material
 -- ABS plastic
Type of laser
 -- Diode laser
Laser wave length
 -- 670 - 675 nm
Laser class
 -- 2
Maximum laser power
 -- 1 mW
Maximum distance between measuring units
 -- 2.8 ft (850 mm)
Type of detectors
 -- Single-axis PSD
Cable length
 -- 5.2 ft (1.6 m)
Dimensions
 -- 3.4 x 3.1 x 1.5 in (87 x 79 x 39 mm)

=========================
Display unit
=========================

Housing material
 -- ABS plastic
Display type
 -- LCD 1.4 x 1.9 in (35 x 48 mm)
Battery type
 -- 2 x 1.5V "C" Alkaline (LR14)
Operating time
 -- 20 hours continuous operation
Auto power off
 -- After 1 hour if no keys are pressed
Displayed resolution
 -- 0.1 mil (0.0001")
 -- 0.01 mm in metric mode
Dimensions
 -- 9.1 x 3.2 x 2.4 in (230 x 81 x 62 mm)

=========================
Complete System
=========================

Shaft diameter range with chain
 -- 1/8" to 20" maximum
Accuracy of system
 -- <2% +/-0.00039 in
Temperature range
 -- 32 - 140°F (0 - 60°C)
Operating humidity
 -- Non-condensing
Weight in case
 -- 10 lbs

Order This Item


 

Accurate & Reliable

The Shaft Hog features a unique "laser line" instead of the traditional laser dot. This makes setup and alignment much easier, as the line is wide and is easily projected to the laser detector.

The Shaft Hog also features graduated labels on the laser heads that work with the laser lines to help the operator "visualize" the misalignment condition. This visual cue reinforces the digital values that are displayed on the unit, and makes evaluation and correction of misalignment an easier process.

The alignment data is continuously updated. All movements of the motor are simultaneously displayed on the screen. The measurement results are displayed with a resolution of 0.0001". As you shim or move the machine the values update to let you know exactly where you are each step of the way. This means no more guessing about the shim amount, or how much to move a machine. With the Shaft Hog laser alignment system there is no interpreting of the values as with dial indicators. The position sensitive detectors precisely measure the misalignment. The large LCD display clearly presents the position of the machinery being aligned.

The Complete Laser Alignment Tool

The Shaft Hog comes with all the hardware and tools you need to begin doing laser alignments as soon as you open the carrying case. Sleek anodized aluminum chain brackets fit a wide range of shaft diameters (from approximately 1/8", and extra chain lengths can be added to accommodate virtually any shaft diameter). The transmitter-detector units are mounted on rods extending from each of the brackets. The transmitter-detector units are clearly labeled (one for the stationary machine, and the other for the movable machine). The cables and the display unit are also clearly marked, simplifying the set up. Once the transmitter-detector units are mounted they plug directly into the display box. The easy-to-use, ergonomically designed display fits right in your hand. Its intuitive design means you can step through an alignment as soon as you pick it up. The Shaft Hog has been designed to let you concentrate your skill and effort on performing precision alignments, not on figuring out how to use the tool.

The Shaft Hog is powered with standard batteries (2 "C" cells). Approximately 24 hours of continuous operation are obtained from a fresh set of batteries. The system is delivered in a rugged case and includes all the equipment required for horizontal shaft alignments.